Watts Premier Instant Hot Water Recirculating Pump System

Suppose you have to spend a lot on the tankless water heater, but now you are in a sulk because your tankless cannot give you instant hot water. You need to wait for 5-10 seconds; meanwhile, thousands of gallons are wasted. The best solution for this is to install a recirculation pump. Watts Premier Instant Hot Water Recirculating Pump is an easy-to-install pump with 4.5 stars out of 5. Let us know if it is worthy of your money and attention.

Features of Watts Premier Instant Hot Water Recirculating Pump System

Conserves water

A recirculation pump is a fancy luxury that gives you hot water instantly. Still, another thing makes it necessary that 15000 Gal. of water per year that would otherwise be wasted on your few second wait for hot water every day.

Maintenance-free

If you wonder, another pump means another regular maintenance issue like a tank-less water heater. You will be glad to know this recirculation pump needs no annual maintenance. The thing is, the pump does not move any water. When you power it, the sensor valve opens, and the pump moves water from the hot water line to the cold water line. These pumps are designed to operate without any flow and use little electricity when it is not moving water. So maintenance is not required.

Pros

• Additional sensor valves are available for homes with multiple plumbing loops.
• Very easy to install in less than 1 hour.
• The pump has everything you will need- a timer and ten ft. electric cord, two adapters with rubber washers, valve mounting screws, a sensor valve, and two 12 in. supply lines.
• Saves money up to 10% of the water bill.
• The system includes 24 hours dual-setting programmable timer that lets you activate the pump only when needed.

Cons with solution

Branch line water does not heat up quick

The manual encourages you to put the recirculation pump at the far end reach, but the truth is only the mainline gets instant hot water, and branch lines suffer big time.

Solution: A good way to solve the problem is to put a sensor at each fixture. You need to put a sensor at one fixture of every washroom, especially at the furthest down the line from the water. This will guarantee instant hot water at every line. The system already comes with multiple valves for this purpose.

Waste of electricity

Keeping it on for as long as the tankless unit eats up a lot of electricity; is an extirpate on the utility bill.

Solution: You can save the extra usage by keeping it off other than when you have to use it. This problem will disappear if you buy remote control for this purpose, like one from Etekcity® Wireless Remote Control Outlet. They are a very reasonable price. Attach them with the recirculation pump so when you have to use it, click the button on and control it on-demand—one thing you need to do is set the pump timer in the "ON" position.

Frequently Ask Questions

Does Watts Hot Water Recirculating System work with a single handle faucet?

Yes! Like two handle style faucets, the temperature valve; connect with a single handle faucet. A single handle faucet is workable; it has both a cold and hot water line to the faucet.

Does the time clock need to reset after a power failure?

Yes, you need to reset the timer. Pop off the front cover and turns the dial until the inside dial reads the correct time.

Can Watts Hot Water recirculating System be used without the sensor valve?

Yes, to use it without the sensor valve, you need to install a separate return line.

Conclusion

Watts Hot Water Recirculating System will ensure you never have to face the unwanted surprise of cold water from a hot water outlet. It gives hot water at the very first touch. The only thing you need to verify before buying this 120 volt, 6.4 pounds weighed recirculation pump that- if your water heater goes with it or not.